
Enter a target original gravity (OG) to find how much dry or liquid malt extract you need, or switch to reverse mode to estimate OG from the extract you have. For example, 5 lb of DME in 5 US gallons gives an estimated 1.044 OG. Both modes use the final wort volume after top-up. The estimates use typical extract yields and account for malt extract alone.
Malt Extract Gravity Calculator
Find how much dry or liquid malt extract you need for your target original gravity (OG), or estimate the OG from the extract you have.
Use the total wort volume after dilution, before fermentation. For example, enter 5 gallons if you boil 3 gallons and top up to 5.
This estimates gravity from malt extract alone at 44 points per pound per US gallon for DME and 36 for LME. Product yield can vary. Steeping grains, partial-mash runnings, and added sugars can also contribute gravity.
Doing a partial boil? If you start with 2.5 gallons and top up to 5 gallons in the fermenter, enter 5 gallons as your batch volume.
Malt extract gravity examples
- Find how much extract to use. To brew 5 gallons at a target OG of 1.050, select dry malt extract (DME). The calculator estimates 5 lb 10.9 oz of DME.
- Estimate OG from the extract you have. If you have two 3.3 lb cans of liquid malt extract (LME), enter 6.6 lb in reverse mode. Topped up to 5 gallons, that gives an estimated OG of 1.048.
Why is my measured OG different?
After topping up a partial boil, stir the wort thoroughly before taking a hydrometer sample. If the concentrated wort and top-up water are unevenly mixed, the sample can read high or low. Double-check your final volume and account for any added sugar or gravity contributed by specialty grains.
Starting with an all-grain recipe? Use the All-Grain to Malt Extract Conversion Calculator to work out how much extract to substitute for the base malt.